What are you looking for?
The All-Fuel Twin Wall Flue System, also known as Twin Wall Chimney Flue System, features an advanced twin wall flue design — an inner wall and an outer wall. It can adapt to a wide range of fuels and discharge exhaust gases efficiently. This residential chimney ensures safety and stability, reduces heat loss and improves energy utilization efficiency, making it a reliable and guaranteed flue system. Leading twin wall flue manufacturers have engineered this system to meet the highest standards of performance and durability.
Designed to maintain the required 50 mm clearance between the chimney and combustible materials.
Be used when the flue run needs to transition from horizontal to 135°. It can be used together with a 45° bend
Designed to allow length adjustment from 300 to 500 mm
Use for 90 degree offset. Combine connectors from two or more appliances into a common vent
Designed to allow length adjustment from 300 to 500 mm
Designed to allow length adjustment from 500 to 800 mm
Available in nominal installed lengths of 800mm
Designed to allow length adjustment from 500 to 800 mm
Chimney Protector & Better Ventilation
Flexible liner to twin adaptor for chimneys removed above roof level
Used to secure and decorate the installation opening on interior or exterior walls and ceilings.
Chimney Protector & Better Ventilation
Available in nominal installed lengths of 800mm
Chimney Protector & Better Ventilation
The flashing system will effectively seal and remain pliant over a wide range of external chimney surface
Used to secure and decorate the installation opening on interior or exterior walls and ceilings.
Used to cover the roof opening and prevent rainwater from entering the interior
Used to cover the roof opening and prevent rainwater from entering the interior
Designed to allow length adjustment from 304 to 609 mm
Provides a 30° change of direction.
Available in nominal installed lengths of 609mm
Designed for installation on sloped roofs without an attic
Used as the entry to a vertical chimney from a horizontal stove outlet, or as an inspection opening.
Used to connect twin wall to single wall connecting flue pipe.
The adjustable wall bracket provides lateral support for the flue run
Ensures each joint is strong, secure, and weatherproof
Chimney Protector & Better Ventilation
Same as the Rain Cap, but with a mesh incorporated to protect from birds.
Same as the Rain Cap, but with a mesh incorporated to protect from birds.
The fixed bracket provides lateral support for the flue run and keeps the required 50 mm clearance from the wall
Provides a 30° change of direction.
Provides a 90° change of direction.
Use for 90 degree offset. Combine connectors from two or more appliances into a common vent
Be used when the flue run needs to transition from horizontal to 135°. It can be used together with a 45° bend
Chimney Protector & Better Ventilation
Ensures each joint is strong, secure, and weatherproof
The Rain Cap offers a degree of protection from rain and is suitable for solid fuel and oil fired appliances.
Used outdoors and installed at the base to provide 1650 mm of support for the chimney
Used to secure pipes passing through the floor
Chimney Protector & Better Ventilation
Designed to allow length adjustment from 340 to 570 mm
Single to twin wall adapter for connecting to the stove outlet
Used when the chimney needs to be connected to a flexible hose
Provides a 15° change of direction.
Provides a 30° change of direction.
Be used when the flue run needs to transition from horizontal to 135°. It can be used together with a 45° bend
Use for 90 degree offset. Combine connectors from two or more appliances into a common vent
Provides a 45° change of direction.
Provides a 90° change of direction.
Designed to allow length adjustment from 300 to 500 mm
Available in nominal installed lengths of 250mm
Available in nominal installed lengths of 1000mm
Single to twin wall adapter for connecting to the stove outlet
Single to twin wall adapter for connecting to the stove outlet
Available in nominal installed lengths of 500mm
