
For the Holcim cement plant in Belgium, Rainbow manufactured a 144.2 m wall-supported steel chimney designed for a wide operating range of gas flow and temperature. The system combines a Q355B outer shell, a 316Ti inner flue, thermal insulation and a top-mounted silencer. Rainbow’s scope also covered export packaging, delivery to the designated Chinese port, installation guidance and commissioning support.
Project Parameter | Specification |
Project location | Holcim plant, Belgium |
Industry | Cement production |
Chimney quantity | One system |
Chimney height | 144.2 m |
Structural configuration | Sleeve-type, wall-supported steel chimney |
Outlet diameter | 3,500 mm internal; 3,780 mm external |
Inner flue | 4 mm 316Ti stainless steel |
Outer shell | 10 mm Q355B structural steel |
Flue gas temperature | 72–197°C |
Normal flue gas flow | Approximately 137,089–403,000 Nm³/h |
Maximum flue gas flow | 548,393 Nm³/h |
Design service life | More than 20 years |
Manufacturing date | March 2026 |
The chimney operates across a broad temperature and flow range. Flue gas temperature varies from 72°C to 197°C, while the maximum flow reaches 548,393 Nm³/h. The gas stream mainly contains N₂, O₂, H₂O and CO₂. These changing conditions had to be considered in the flue dimensions, material configuration, insulation and structural interfaces.
The Belgian site has an ambient temperature range of −25°C to +40°C, an average temperature of approximately 11°C and an elevation of 295 m. The basic wind speed is 25 m/s, equivalent to approximately 90 km/h. For a 144.2 m wall-supported structure, the industrial chimney design therefore had to coordinate wind loading, lateral support, thermal movement and the interfaces with the adjacent plant structure.
Noise control was another project-specific requirement. A silencer was installed at the chimney outlet to achieve a specified noise level of no more than 75 dB at a distance of 1 km. The silencer connects to the chimney by flange, while its maintenance platform is secured to the silencer casing through bolted gusset plates.
The industrial steel chimney uses a sleeve-type arrangement with separate structural and gas-contact layers. The 10 mm Q355B outer shell provides the main steel enclosure, while the 4 mm 316Ti inner flue carries the exhaust gas.
The inner flue material was selected for direct exposure to the operating gas stream and temperature variation. Insulation between the inner flue and outer shell limits heat transfer, with the external wall temperature required to remain below 60°C.
The chimney was supplied without embedded components or anchor bolts. The supply package included the chimney body and base, together with the top silencer and its maintenance platform. Aviation lights, grounding and lightning protection were coordinated within the wider project interface.
The chimney structure was manufactured to C4 corrosion-protection requirements. Steel surfaces received blasting or shot-blasting preparation to Sa 2.5 before application of the protective coating system. Internal and external welds were controlled to ISO 5817 quality level C.
The supply package required a CE Certificate and Declaration of Conformity. All bolts were specified as Grade 8.8 hot-dip galvanized fasteners with corresponding CE documentation.
The steel chimney design, manufacturing documentation and supplied equipment were coordinated with the project’s European engineering requirements and applicable Belgian environmental requirements. The final configuration also considered local temperature, humidity, wind conditions, operating temperature and the required service life of more than 20 years.
Rainbow manufactured the chimney in transportable sections for sea freight. Each section was supported on shipping saddles, with cross bracing at both ends to limit deformation during transportation and repeated handling.
New reinforced wooden packaging and protective measures were used against moisture, rain, corrosion, vibration and mechanical damage during ocean and inland transport. The chimney sections were shipped as complete segments, while the silencer could be transported either as a complete assembly or in dismantled form according to shipping requirements.
The delivery period was 90 days after receipt of the advance payment and approval of the project drawings. Rainbow transported the equipment to Tianjin Port or Jingtang Port and provided on-site installation and commissioning support.
This project demonstrates Rainbow’s ability to coordinate tall chimney engineering, stainless steel inner-flue fabrication, noise-control equipment, CE documentation and export delivery for European cement plants and other heavy industrial facilities.
